home *** CD-ROM | disk | FTP | other *** search
/ Tech Arsenal 1 / Tech Arsenal (Arsenal Computer).ISO / tek-20 / mods_all.zip / IC7000.3 < prev    next >
Text File  |  1992-09-15  |  1KB  |  37 lines

  1. ICR7000.3
  2.  
  3.                   R7000 Scan Circuits
  4.  
  5. The scan rate of the R7000 is determined, in part, by a
  6. simple  clock  outside  the  microprocessor.  The front
  7. panel SCAN SPEED rheostat and resistor R18  (and  other
  8. components in the LOGIC UNIT) control the speed of this
  9. clock.  The clock output is connected to  what  appears
  10. to  be an input port on the microprocessor.  The upshot
  11. is that we can affect the scan rate  without  affecting
  12. the other chores performed by the microprocessor.
  13.  
  14. The modification consists simply of soldering a 470,000
  15. ohm  resistor  across  the leads of resistor R18 on the
  16. LOGIC UNIT circuit board.
  17.  
  18. How was the value of 470,000 ohms chosen?  Experimenta-
  19. tion  with  different  resistor  values showed that for
  20. values both above and below  470,000  ohms,  the  R7000
  21. scan  rate  decreases.   Not  having  the R7000 Service
  22. Manual, I assume this can be explained by the  firmware
  23. within the microprocessor associated with the scan rate
  24. input port.1
  25.  
  26. Adding the 470,000 ohm resistor in parallel  with  R18,
  27. rather than just replacing R18, has a few advantages:
  28.  
  29.   1.  The modification is easily undone, returning  the
  30.       radio to stock condition.
  31.  
  32.   2.  The LOGIC UNIT board does not have to be removed,
  33.       as  would  be the case if R18 was unsoldered from
  34.       the foil side.
  35.  
  36. CONTINUED IN FILE ICR7000.1 - REQUEST FROM SERVER
  37.